Daesung Machinery Co,.Ltd
 
 
 
 
 
1. INLET CHUTE
The materials enable to cover and utilize all sufraces of screen mesh sience
the distribution guide has been mounted inside
2. REAR DOOR
Open and closed so that work will be done smoothly in replacing the mesh.
Enable to replace only the lowest screen unit of multistage screen
3. SHIPPING BRACKET & PROTECTION RUBBER
 
Shipping bracket keep the machine with locking it transportation.
Protection rubber established to protect the spring from rust by humidity
4. VIBRATOR
 
This is equipped the high-function and efficiency Daesung Vibrator
5. SAMPLING & SCREEN UNIT REPLACEMENT HOLE
This hole is used to conduct sampling and confirm the effect during operation
this is enable to change the screen unit with hooking up outlet
6. INSPECTION DOOR
This is enable to inspect the inside of trough simple and broadly.
There are two type model of left side perpect prevention dust type and right side simple opening type
7. VENT HOLE
 
This is enable to collect the dust during seperation of meteriais and make good sanitary condition of workshop
AMPLITUDE INDICATOR
 
User check amplitude of machine by indication sticker on the side of trough
CLEANING DEVICE (BOUNCING BALL DEVICE)
Maximazing the efficiency of screening and getting rid of mesh open clogging,
it made up silicon rubber or naturalrubber ball and high elasticity ball tray of wire net tray
ATTENTION POINTS
Special attention before operation note in seperate potision of machine